Xerox DocuPrint 100 Supplementary Manual

Also see for Docuprint 75: Getting started Software guide Planning guide Software guide Operator's guide

Xerox DocuPrint 100 Supplementary Manual Manual pdf 42 page image

Managing the Tape Client3-4 Tape Client Job Submission GuideManaging the tape driveIn the Input Device group box on the Tape Client window, youcan initiate the following tasks to manage the tape drive fromwhich you are sending jobs.Renaming a tapedriveIf you have more than one tape drive connected to your printer,you must select the drive that you want to use to send the job.When the printing system is installed and your tape drives areconfigured on it, the system names them “Tape 0,” “Tape 1,” etc.If you want to assign a different name to a tape drive, followthese steps:1. On the Tape Client window, select the drive that you want torename from the Device menu.2. Click Rename.... The Rename Device window opens,displaying in the Old Name field the name of the drive thatyou selected.Figure 3-3. Rename Device window3. In the New Name text field, enter the name you want to givethe tape drive.4. Click OK. The Rename Device window closes, and the newdrive name is displayed on the Device menu.NOTE: The renaming of the tape drive applies to the Tape Clientwindow, not to the DocuSP window.