Xerox DocuPrint 100 Installation Planning Manual

Also see for Nuvera 100: System guide Getting started Install guide Software guide Planning guide

Contents

Xerox DocuPrint 100 Installation Planning Manual Manual pdf 176 page image

DocuPrint NPS/IPS on a Novell networkD-8 Installation Planning GuideNovell configurationOnce you decide to configure the DocuPrint NPS/IPS as anRPRINTER or as a PSERVER on your Novell network, there area number of tasks you must perform.Configuring DocuPrint as a PSERVERThe following is a summary of the tasks to perform if theDocuPrint NPS/IPS is configured as a PSERVER:1. Perform the following Novell tasks:a. Sign on to the Novell workstation as a networkadministrator.CAUTIONIf you use Novell’s Quick Setup feature, you must do thefollowing after creating the queue and server:b. From PCONSOLE, create a Printer Queue (for example,Gazette) and a Print Server (for example, PGazette).i. In the definition of the server, choose Printer Setup.ii. Define the printer per the naming conventionsuggested by NPS/IPS.iii. Select DEFINED ELSEWHERE.c. From the Print Server window, configure a printer forPServer using the Printer Configuration option.d. Enter any name (for example, Gazette) for the printer.e. Select Remote Other/Unknown type for the printer andsave the information.f. Define the printer in the Queue Service by highlighting theprinter name (for example, Gazette) and pressing Enter.g. Press the Insert key to select the Print Queue (forexample, Gazette) you want to bind with PServer (forexample, PGazette).h. Save the information.2. When configuring NPS/IPS, answer the configurationquestions as follows:• Remote Printer for Novell Netware --