Xerox ColorQube 9203 Quick User Manual

Also see for ColorQube 9201: Install and operation instructions User guide Evaluator guide System administrator guide Quick guide

Xerox ColorQube 9203 Quick User Manual Manual pdf 9 page image

Power On and OffColorQube™ 9201/9202/9203Quick Use Guide9Power On and Off1. To power ON: Press the Power ON/OFF switch on the left side of thedevice to switch on the device. Some functions will be ready beforeothers. The device will be ready to scan in approximately 3 minutes.2. To power OFF: Press the Power ON/OFF switch on the left side of thedevice. A confirmation screen will appear, touch the Power Down button.Note: The device will automatically shut down after 60 seconds if you donot touch the Power Down button. Power Down will result in the deletionof any jobs currently in the list. Do not switch on until the device hascompletely powered off. Do not physically move the device unless it hasbeen powered off for more than 30 minutes.Energy Saver and Quick RestartThe Energy Save button on the control panel can be used for additional powerfunctions.Select the Energy Save button on the control panel.• If Energy Saver is selected, the device will immediately enter the PowerSaver Mode appropriate to its configuration. If there are any jobs in thejob list, a second screen displays.To re-activate the device when in this mode, touch a button on the touchscreen or control panel.• If Quick Restart is selected and confirmed the device will restart. Anycopy jobs in the job list will be deleted, print jobs in the job list arerecovered.• If Cancel is selected the power down options will be cancelled and thedevice will be available for use.