Maintenance122 Xerox ® ColorQube 8580/8880 Color PrinterUser GuideMoving the PrinterThis section includes:• Precautions for Moving the Printer............................................................................................................................. 122• Moving the Printer Within the Office ........................................................................................................................ 123• Preparing the Printer for Shipment ............................................................................................................................ 124Precautions for Moving the PrinterTo avoid injuring yourself or damaging the printer:WARNINGS:• Parts of the printer are hot and need time to cool down before moving or packing the printer. Toavoid personal injury or printer damage, wait 30 minutes for the ink to solidify and the printheadto cool down.• Before you move the printer, remove any optional trays.• To lift the printer, always use at least two people to grasp the hand holds on each side of theprinter.CAUTIONS:• Before you move the printer, see Moving the Printer Within the Office on page 123.• Keep the printer level. Tilting the printer can cause the ink to spill inside.• Wait for the printer to complete the cool-down period for the ink to solidify. The printer fans shutdown when the printer is cool enough to move. Always allow the printer to cool before it ismoved to avoid ink spills that can damage the printer.• Wait for the printer to complete its power off sequence. Then unplug all cables and cords. Neverturn off the printer by pulling the power cord or using a power strip with a power switch.
