Output Size DefaultsSelect the sizes that will be displayed as the Output Size when selecting Auto% forscanning documents (as displayed on Reduce/Enlarge feature on the Scan Optionsscreen). Any output sizes can be assigned to output size buttons 1-14. By selectingcommonly used sizes, you can reduce the number of selection operations required fora scan job.1. Select System Settings > Scan Service Settings > Output Size Defaults.2. Select the item to be set or changed, and select Change Settings.3. Select the desired setting.4. Select Save. You are returned to the Output Size Defaults screen.5. Repeat Steps 1-4 for the remaining Output Size Defaults items.6. Select Close from the Output Size Defaults screen; you are returned to the ServiceMode Settings screen.A/B Series SizeSelect from ten different A and B series sizes.Inch SizeIf you select this option, you can then select from eleven different inch-series sizes.OthersIf you select this option, you can then select from fourteen other sizes.Reduce/Enlarge PresetsSelect the magnification levels as shown in the Preset% option (as displayed on theReduce/Enlarge feature on the Scan Options screen). Assign any magnification to theReduce/Enlarge Preset buttons 1-9; you cannot select 100%.1. Select System Settings > Scan Service Settings, then select Reduce/Enlarge Presets.2. Select the item to be set or changed, and select Change Settings.3. Select Preset% or Variable%.4. Select the desired setting.5. Select Save.6. Repeat Steps 1-5 for each of the R/E Presets items.7. From the Reduce/Enlarge Presets screen, select Close to return to the Scan ServiceSettings screen.Xerox® Color C75 Press12-6System Administration GuideScan Service Settings
