Xerox 8290 User Manual

Contents

Xerox 8290 User Manual Manual pdf 107 page image

5 Troubleshooting8265/8290/8365/8390 User Guide 99No. Display Solutions References1 Ink Refill **min The printer performs ink charging. Wait for awhile.Refer to ‘Installingink cassettes’2 During cleaning **min The printer performs head cleaning. Wait for awhile.Refer to ‘Headcleaning’3 Media Initial ******** The printer performs initial setting of media.Wait for a while. Indicates the media type settingmade.Refer to ‘Settingmedia type’4 During dischargeWait for a whileThe printer performs head cleaning and inkdischarging. Wait for a while.Refer to ‘ChangingInk Types’5 During washingWait for a whileThe printer performs a head cleaning.Wait for a while.Refer to ‘ChangingInk Types’5.3.2 Error Message Display and SolutionsThe following are the message type error display and solutions. The following message type errors aredisplayed when an error occurs while operating the printer. When one of the following message typeerror displays appears, the printer may stop operation. If the printer stops operation, solve the problem todelete the error message and restart the printer.(1) Error messages regarding media feedingThe following error message is displayed on the first line of the operation panel.No. Display Descriptions Solutions References1 UndefinedmediaThe printer failed to detect themedia.(The printer stops.)Reload the media. Refer to ‘Loadingmedia’2 Media Slant The media was fed at an angle intothe printer.(The printer stops.)Reload the media. Refer to ‘Loadingmedia’3 End Of Roll Roll media runs out.(The printer stops.)Load new rollmedia.Refer to ‘Replacingmedia’4 Cover Open The front cover is open. (The printerstops.)Close the frontcover.-5 Please SetMediaThe pressure roller has beenraised.There is no media.Set the media andlower the pressureroller.-6 Media JAMErrorThe media jammed.(The printer stops.)Remove thejammed media andreset a media.Refer to ‘Whenmedia jams occur’