Xerox 6200DX - Phaser Color Laser Printer Support Manual

Also see for 6200DX - Phaser Color Laser Printer: Brochure & specs Network guide Setup and quick reference guide Paper guide Installation instructions

Contents

Xerox 6200DX - Phaser Color Laser Printer Support Manual Manual pdf 14 page image

Phaser® 6200 Color Laser PrinterCopyright © 2002 Xerox Corporation. All Rights Reserved. 11User Safety SummaryYour printer and the recommended consumable supplies have been designed and tested to meet strictsafety requirements. Attention to the following notes will ensure the continued safe operation of yourprinter.Electrical Safety Use the power cord supplied with your printer. Do not use a ground adapter plug to connect the printer to a power source receptacle that lacks aground connection terminal. Plug the power cord directly into a properly grounded electrical outlet. Do not use an extensioncord or power strip. If you do not know whether an outlet is grounded, ask an electrician to checkthe outlet.WarningAvoid the potential of electrical shock by ensuring that the printer is properly grounded. Do not place the printer where people may step on the power cord. Do not place objects on the power cord. Do not obstruct the ventilation openings. These openings are provided to prevent overheating ofthe printer. Do not drop paper clips or staples into the printer.WarningDo not push objects into slots or openings on the printer. Making contact with a voltage pointor shorting out a part could result in fire or electrical shock. If you notice unusual noises or odors, switch off the printer power immediately. Disconnect thepower cord from the electrical outlet. Call an authorized service representative to correct theproblem. The power cord is attached to the printer as a plug-in device at the back of the printer. In the eventit is necessary to remove all electrical power from the printer, disconnect the power cord from thepower receptacle.WarningIf the product loses the ground connection, usage of knobs and controls (and otherconductive parts) can cause an electrical shock. Electrical products may be hazardous ifmisused.WarningFor your protection, do not disable any internal safety locks or sensors.