Xerox 6030 Setup Manual

Also see for 721: User guide Operator's manual User guide Release note Release note

Contents

Xerox 6030 Setup Manual Manual pdf 9 page image

FreeFlow Accxes Printer System and Web Print Management Tool Setup Guide 5Configuration & Settings Test PrintsThe first task that is performed with ALL network environment setups is the printing ofConfiguration and Settings test prints. You can print them using the Web Print Management Toolor the Printer Control Panel.Printing a Test PrintFrom the Web Print Management Tool:1. On the Web Print Management Tool, select UTILITIES> Test Print.2. Select Normal Test to get both a Configuration and Settings Test Print.From the Printer Control Panel(510, 8825, 8830, 8850 printers only):CONFIGURATION Test Print1. While the Printer is NOT printing, at the Control Panel press the ONLINE key. PAUSED will bedisplayed.2. Press the ENTER key and the UTILITIES menu will be displayed.3. Press the ENTER key and the TEST PRINT menu will be displayed.4. Press the ENTER key again and will be displayed.5. Press the NEXT key as many times as required to choose the PRINTER CONFIGURATIONTest Print.6. Press the ENTER key again to enable the selected Test Print, and the displayed menu willreturn to UTILITIES.7. Press the EXIT key twice and the display will return to PAUSED.8. Press the ONLINE key to put the Printer back on line and print out your Test Print.SETTINGS Test PrintRepeat Steps 1-4 above.Step 5: Select PRINTER SETTINGS Test Print.Repeat Steps 6-8 above.Viewing the Test PrintsThe purpose of test prints is to provide a record of current system settings for use in dailyoperations, network communications setup, and restoration of desired parameters in cases ofunexpected change (such as through accidental use of the Restore Factory Default utility). Testprint sets should be saved at the following times:y When the initial install is complete and default settings are defined.y Anytime default settings are changed.Note: For the 721 printer only, the test print is generated when the power is switched on.The reference set of the test print pages should be stored with the machine service log.