Xantrex XC3012 Owner's Manual

Also see for XC1524: Owner's guide

Contents

Xantrex XC3012 Owner's Manual Manual pdf 18 page image

Introduction1–6 975-0187-01-01Onboard Status PanelThis section describes the parts of the onboard status panel of the XC Series.Figure 1-3 shows the panel.Figure 1-3 XC Series Onboard Status PanelItem Description1 Charge Current• Displays the output charge current in % of charger maximum for the bank being charged• 100% indicator light flashes to indicate battery temperature too high (> 50 °C, 122 °F)• 10% indicator light flashes to indicate battery temperature too low (< 0 °C, 32 °F)• 25% indicator light flashes to indicate that a battery has been disqualified (see page 3–4)2 Charger Status - READY• Ready indicator light illuminated indicates all batteries are fully charged, and are now infloat or rest3 Charger Status - CHARGING• Charging indicator light illuminated indicates unit is performing a normal charge cycle• Charging indicator light flashing indicates that the unit is performing an equalization cycle4 Charger Status - FAULT• Fault indicator light continuously illuminated indicates any fault condition that preventsthe XC Series from charging one or more batteries, but is not a charger failure - remotedisplay shows details of fault• Fault indicator light flashing indicates the XC Series has experienced a charger failure -remote display shows err followed by CHf1234XC_Charger_Owner.book Page 6 Friday, August 12, 2005 3:23 PM