Xantrex TC1012 Owner's Manual

Also see for Truecharge TC1012: Installation guide Owner's guide Installation guide

Xantrex TC1012 Owner's Manual Manual pdf 29 page image

Remote Panel (Sold Separately)975-0401-01-01 1–15Remote Panel (Sold Separately)This section describes the parts of the optional remote panel(Part number: 808-8040-00) of the Truecharge™ 2 BatteryCharger. The remote panel can be mounted using acommunications cable up to 15 m (50 ft) from theTruecharge™ 2 Battery Charger connected via thecommunication port for convenience.The Remote Panel can be used to:• Program the charger for battery type and temperature• Set the charger mode (two or three-stage charging)• Activate and terminate equalization (not allowed forGEL and AGM)Important: A “press and hold” action on any panel buttonmeans that the button must be held down for more than threeseconds then released in order to send the instruction. A “press”action on any panel button means that the button must be pressedand released before two seconds have elapsed.Figure 1-7 Truecharge™ 2 Battery Charger Remote Panel (optional)12a5 74 6382 6a