XVision XRN0808E User Manual

Also see for XRN0808E: Quick setup guide

XVision XRN0808E User Manual Manual pdf 15 page image

XRN User GuidePRO15www.xvision.comThe video parameter option allows you to change the encoding/ resolution main and sub stream plus moreof the IP Camera.4.2.2 Video Parameters1. Channel: Select the channel number2. Encoding Type: Main stream/ Sub stream/ Main stream (Event)3. Stream Type: Audio & Video /Video optional4. Resolution: Set the resolution of the IP cameras5. Bit Rate Type: CBR/VBR optional6. Bit Rate: Select relevant bit rate which needed7. Frame Rate: Select different frame rate from the drop-down list, “FULL “default.8. Video Quality: Different level video quality optional, “Highest” default.Please NoteThese settings are only available for our Protocols I8 and I9 not Onvif4.2.3 Encoding Type & ResolutionIf you have added your IP camera but are getting no live image or a frozen image you may need to changethe Sub Stream resolution and the Stream type on the XRN.The table on the following page will show you all the supported stream types on your XRN unit.