Menu
X10 FireCracker CK17A User Manual
Also see for FireCracker CK17A: Owner's manual
 |
For more information right-click on your mouse to access theextensive on-line help. This also accesses the Test Communica-tions menu, which lets you change the COM port that theFireCracker works with. You can also print labels from here tomatch those on the on-screen PalmPad remote and place themon a physical PalmPad (sold separately). You can also turn on oroff sound effects that occur when you press buttons. Personswith physical disabilities who have software that can accesstheir keyboard can simply “type” A 1 ON, for example, to turn onany X10 Module.F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15OF THE FCC RULES. OPERATION IS SUBJECT TO THEFOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAYNOT CAUSE HARMFUL INTERFERENCE, AND (2) THISDEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSEUNDESIRED OPERATION.NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADETO THE UNITS. ANY CHANGES MADE TO THE UNITSWILL VOID THE USER'S AUTHORITY TO OPERATE THEEQUIPMENT.LIMITED1-YEARWARRANTYX10.com, a division of X10 Wireless Technology, Inc. (X10)warrants X10 products to be free from defective material andworkmanship for a period of one (1) year from the original date ofpurchase at retail. X10 agrees to repair or replace, at it’s solediscretion, a defective X10 product if returned to X10 within thewarranty period and with proof of purchase.If service is required under this warranty:1. Call 1-800-675-3044 or visit www.x10.com, or e-mailsales@x10.com to obtain a Return MerchandiseAuthorization (RMA) number.2. Return the defective unit postage prepaid to X10 (seeaddress on back).3. Enclose a check for $4.00 to cover postage and handling.4. Enclose a dated proof of purchase.5. X10 is not responsible for shipping damage. Units to bereturned should be packed carefully.Please visit www.x10.com/warrantyto complete your on-line warranty registration. Thank you.For help or more information on setup, please visit:www.x10.com/supportFireCrackerWireless Computer Interface Kit Controls up to 256 lights and appliances instantly from your PC, by remote control. Connects to your PC’s serial port and has a pass-through port so you don’t lose a port. Works with any X10 Transceiver (TM751 included) and any X10 Module (sold separately). Works with FireCracker software (available from www.x10.com/software). Up to 100 ft. range.Model CK17A(includes CM17A and TM751)CK17A-9/01The FireCracker Computer Interface sends Wireless Radio Frequency (RF) signals from your PC to an X10 Transceiver(TM751 included). The Transceiver then passes the signals onto your house wiring to control lights or appliances around yourhome. You plug lights and appliances into X10 Modules (sold separately).™Right-click ona label totype in thename of thelight orappliance thisbuttoncontrols.Click tochange theHousecode setting(set it to the same letteras your TM751 and X10Modules).Click to control X10Modules set to 1 thru 8or 9 thru 16.Click toturn X10Module onor off.Then clickto dim orbrightenLamp orWallSwitchModules.1. Set the TM751 Transceiver to Housecode A. Plug a lamp orappliance into the TM751. Plug the TM751 into an AC outlet(use one near your PC for now).2. Plug the FireCracker into yourcomputer’s serial port. If somethingwas already plugged into this port,plug it into the FireCracker.3. Download the FireCracker program from:www.x10.com/software4. Run the Setup program to install the FireCracker software.5. Run the X10 FireCracker application.6. Select the COM port you are using and click on Try It. Clickon OK, a picture of an X10 PalmPad remote appears on yourcomputer monitor. Use the on-screen remote control just likea regular remote control: Click on 1 to test the Transceiver. |
Related manuals for X10 FireCracker CK17A
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved