GAS-FIRED WARM AIR FURNACE INSTALLATION INSTRUCTIONS(Type FSP Category IV Direct or Nondirect Vent Air Furnace)These furnaces comply with requirements embodied in theAmerican National Stardard/National Standard of Canada ANSIZ21.47 CSA-2.3 Gas Fired Central Furnaces.NOTE: Please contact your distributor or our website forapplicable Specification Sheet referred to in this manual.WPIO-299HTradewinds Distributing Company, LLC14610 Breakers DriveJacksonville, Florida 32258Whirlpool Gold® ModelsWGFM195, WFD195ATTENTION INSTALLATION PERSONNELAs a professional installer, you have an obligation to know the product better than the customer. This includes allsafety precautions and related items. Prior to actual installation, thoroughly familiarize yourself with this instructionmanual. Pay special attention to all safety warnings. Often during installation or repair, it is possible to placeyourself in a position which is more hazardous than when the unit is in operations.Remember, it is your responsibility to install the product safely and to know it well enough to be able to instruct acustomer in its safe use. Safety is a matter of common sense...a matter of thinking before acting. Most dealers havea list of specific good safety practices...follow them.The precautions listed in this installation manual are intended as supplemental to existing practices. However, ifthere is a direct conflict between existing practices and the content of this manual, the precautions listed here takeprecedence.PLACEHOLDERFOR BAR CODE