Menu
Whirlpool W10115773 Instruction Sheet
  |
Instruction Sheet W10257618A 3/09Instruction Sheetfor Backsplash Kit Installation(30”/36”/48” Range or Cooktop Application)11. Assemble rear panel to backsplash using 7 of the 10 screwsprovide in kit.2. Position the rear panel against the inner flange of thebacksplash as shown in Figure 1.3. Install mounting screws (7) through the backsplash fl angemounting holes into rear panel and tighten securely, setaside.4. Remove the grates from range or cooktop.5. Remove rear island trim from range or cooktop by removingthree (3) screws from the rear of the appliance. Retain screwsfor future use. See Figure 2.Kit Contains:(1) Backsplash(1) Panel, Rear(10) Screws, 8-18 x .375”(1) Instruction Sheet6. Position new backsplash assembly where the island trim waspreviously removed. Align holes in rear of range or cooktopwith backsplash assembly and secure using the three (3)screws removed in step 5. See Figure 3.7. Install the three (3) additional screws provided with kit to thefront side of the backsplash assembly and tighten securely.See Figure 4.FIGURE 1SCREWS(7 LOCATIONS)BACKSPLASHREAR PANEL(NOTE LOCATION)FIGURE 2SCREWS (3)ISLAND TRIMFIGURE 3SCREWS (3)FIGURE 4SCREWS (3)8. Reinstall the grates onto the range or cooktop.© Whirlpool Corporation 2009(All Rights Reserved) |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved