Whirlpool Michigan 49022 Installation Instructions Manual

Contents

Parts supplied:Installation Instructions120-volt60-HzWasherlevelutilityknifeadjustable wrench or9/16" open-endwrenchscissors✔✔18. CHECK ELECTRICALREQUIREMENTS. BE SURE YOUHAVE CORRECT ELECTRICALSUPPLY AND RECOMMENDEDGROUND METHOD.G CompletingInstallation: 20. Turn on water faucetsand check for leaks. Tightencouplings if there is leaking. DONOT OVERTIGHTEN; this couldcause damage to couplings.23. Read the Use and CareGuide. Start the washer and allow itto complete the regular cycle.22. Plug power supply cordinto grounded outlet.(Step 13) (Step 7)Part No. 3952817 Rev. BIMPORTANT:Read and save theseinstructions.IMPORTANT:Installer: Leave Installation Instructions with the homeowner.Homeowner: Keep Installation Instructions for future reference.Save Installation Instructions for local electrical inspector’s use.yellow clamp2 front leveling legswith nutsliterature package(inside washer)Tools needed:✔pliers2 inlet hoses1 drainhose4 flat waterhose washersdrain hose clampOpen lid and remove parts frominside washer. Check that all partswere included.You can be killed or seriously injured ifyou don’t follow instructions.DANGERWARNINGYour safety and the safety of others are very important.We have provided many important safety messages in this manual and onyour appliance. Always read and obey all safety messages.All safety messages will tell you what the potential hazard is, tell you how toreduce the chance of injury, and tell you what can happen if the instructionsare not followed.You can be killed or seriously injured ifyou don’t immediately follow instructions.This is the safety alert symbol.This symbol alerts you to potential hazards that can kill or hurt youand others.All safety messages will follow the safety alert symbol and either the word“DANGER” or “WARNING”. These words mean:

/ 5

Related manuals for Whirlpool 120-volt 60-Hz Washer