Menu
Whirlpool Cabrio Service Manual
                                                            | |
PAGE 1FOR SERVICE TECHNICIAN’S USE ONLYDO NOT REMOVE OR DESTROYIMPORTANT SAFETY NOTICE — “For Technicians only”This service data sheet is intended for use by persons having electrical, electronic, andmechanical experience and knowledge at a level generally considered acceptable in theappliance repair trade. Any attempt to repair a major appliance may result in personal injuryand property damage. The manufacturer or seller cannot be responsible, nor assume anyliability for injury or damage of any kind arising from the use of this data sheet.Whirlpool, Maytag, and Kenmore Control Panels... 2–4Diagnostic Guide .................................................. 5Activating the Service Diagnostic Mode ................ 5Key Activation & Encoder Test .............................. 6Service Test Mode................................................ 6Service Test Mode Chart .................................. 7, 8Software Version Display...................................... 9ContentsFault/Error Codes ........................................... 9, 10Troubleshooting Guide ........................................ 11Troubleshooting Tests................................... 12–23Strip Circuits ...................................................... 24Wiring Diagrams .......................................... 25, 26Component Locations ........................................ 27PART NO. W10680150DIMPORTANT: Electrostatic Discharge (ESD) Sensitive ElectronicsESD problems are present everywhere. Most people begin to feel an ESD discharge atapproximately 3000V. It takes as little as 10V to destroy, damage, or weaken the main controlassembly. The new main control assembly may appear to work well after repair is finished,but a malfunction may occur at a later date due to ESD stress. Use an anti-static wrist strap. Connect wrist strap to green ground connection point orunpainted metal in the appliance-OR-Touch your finger repeatedly to a green ground connection point or unpainted metalin the appliance. Before removing the part from its package, touch the anti-static bag to a green groundconnection point or unpainted metal in the appliance. Avoid touching electronic parts or terminal contacts; handle electronic control assemblyby edges only. When repackaging main control assembly in anti-static bag, observe above instructions.Voltage Measurement Safety InformationWhen performing live voltage measurements, you must do the following: Verify the controls are in the off position so that the appliance does not start when energized. Allow enough space to perform the voltage measurements without obstructions. Keep other people a safe distance away from the appliance to prevent potential injury. Always use the proper testing equipment. After voltage measurements, always disconnect power before servicing. |
Related manuals for Whirlpool Bravos XL
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved