Whirlpool AFB 647 A Instructions For Use Manual

Contents

14ELECTRICAL CONNECTION1) For Great Britain onlyWarning - this appliance must be earthedFuse replacementIf the mains lead of this appliance is fitted with a BS 1363A 13ampfused plug, to change a fuse in this type of plug use an A.S.T.A.approved fuse to BS 1362 type and proceed as follows:1. Remove the fuse cover (A) and fuse (B).2. Fit replacement 13A fuse into fuse cover.3. Refit both into plug.Important:The fuse cover must be refitted when changing a fuse and if thefuse cover is lost the plug must not be used until a correctreplacement is fitted.Correct replacement are identified by the colour insert or thecolour embossed in words on the base of the plug.Replacement fuse covers are available from your local electricalstore.2) For the Republic of Ireland onlyThe information given in respect of Great Britain will frequentlyapply, but a third type of plug and socket is also used, the2-pin, side earth type.3) Socket outlet / plug (valid for both countries)If the fitted plug is not suitable for your socket outlet, pleasecontact Whirlpool Service for further instruction. Please do notattempt to change plug yourself. This procedure needs to becarried out by a qualified Whirlpool technician in compliance withthe manufactures instructions and current standard safetyregulations.60202048GB.fm Page 14 Friday, April 29, 2011 3:24 PM

/ 14

Related manuals for Whirlpool 647