Menu
Whirlpool ACMT 6130/WH/2 Operating Instructions Manual
                                    |
GBClock/MinuteMinder OperationDISPLAYMODEbuttonAUTOicon TIMER iconDECREASE TIMEbuttonINCREASE TIMEbutton•• ••Setting the clockThe clock may be set when the oven is switched offor when it is switched on, provided that the end time ofa cooking cycle has not been programmed previously.After the appliance has been connected to the mains,or after a blackout, the 00:00digits on the DISPLAY will begin to flash.1. Press the "+" and "-" button simultaneously2. Use the “+” and “-” buttons to adjust the time; if youpress and hold either button, the display will scrollthrough the values more quickly, making it quicker andeasier to set the desired value.Setting the minute minderThis function does not interrupt cooking and does notaffect the oven; it is simply used to activate the buzzerwhen the set amount of time has elapsed.1. Press the button several times until the iconand the three digits on the display begin to flash.2. Use the “+” and “-” buttons to set the desired time; ifyou press and hold either button, the display will scrollthrough the values more quickly, making it quicker andeasier to set the value.3. Wait for 5 seconds, If you press the buttom one more timethe display will then show the time as it counts down.When this period of time has elapsed the buzzer will beactivated.Programming cookingA cooking mode must be selected beforeprogramming can take place.Programming the cooking duration1. Press the button several times until iconand the DUR digits on the DISPLAY begin to flash.2. Use the “+” and “-” buttons to set the desiredduration; if you press and hold either button, thedisplay will scroll through the values more quickly,making it quicker and easier to set the value.3. Wait for 5 seconds, after that the icon will be visible4. When the set time has elapsed and the oven will stop cookingyou will hear a buzzer sounds. Press any button to stop thebuzzer.• For example: it is 9:00 a.m. and a time of 1 hour and15 minutes is programmed. The programme willstop automatically at 10:15 a.m.Setting the end time for a cooking mode1. Follow steps 1 to 3 to set the duration as detailedabove.2. Next, press the button until the text END on the diplaybegin to flash.3. use the “+” and “-” buttons to adjust the cooking endtime; if you press and hold either button, the displaywill scroll through the values more quickly, making itquicker and easier to set the desired value.4. Wait for 5 seconds or press the button again,5. When the set time has elapsed, the oven will stop cookingand a buzzer sounds.Press any button to stop it.Programming has been set when the iconis illuminated.• For example: It is 9:00 a.m. and a duration of 1 hourhas been programmed. 12:30 is scheduled as theend time. The programme will start automatically at11:30 a.m.Cancelling a programmeTo cancel a programme:• press the button until the icon corresponding tothe setting you wish to cancel and the digits on thedisplay are flashing. Press the “-” button until thedigits 00:00 appear on the display.• Press and hold the “+” and “-” buttons; this willcancel all the settings selected previously, includingtimer settings.Mon the display.When the cooking process start, the symbol is visibleon the display.AUTOAUTOAUTOAUTOChanging the buzzer frequency1. First press "+" and "-" button simultaneouslyand than press the button for selecting the menufor changing the buzzer frequency. While the text tonX isvisible the buzzer signal frequency can be changed bytouching the "- " repeatedly.Than the colon between hours and minutes is flashing.COOKING PROCESSicon22 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved