Whirlpool 4396710 Installation Instructions Manual

Water Filter Installation InstructionsFollow these simple instructions for your filter type.Refrigerator Water Filter 31. Locate the filter beneath the freezer door in the front base grill.2. Push the button firmly until the filter pops out. Note: there may be some waterin the filter and some spilling may occur.3. Remove the cap from the filter by twisting counter clockwise.4. Reinstall the new cap on the new filter and remove the cap from the filter prongs5. Insert the new filter in the refrigerator and push in firmly until it clicks in place6. Reduce water spurts by flushing air from the system. Run water continuouslyfor 4 gallons (approximately 5 minutes) through the dispenser until water runssteady. Additional flushing may be required in some households where wateris of poor quality.Part 4396841, 4396710 & W10193691Phone:US: 1-866-698-2538Hours of operation:Monday – Friday 8:00 AM – 8:00 PM ESTTM

/ 1

Related manuals for Whirlpool 4396710