Whirlpool 30" (76.2 CM) Manual

Also see for 30" (76.2 cm) Cooktop: Use & care guide Installation and use manual

9Complete InstallationInstall Vent CoversPush the lower vent cover down onto the range hood and lift theupper vent cover to the ceiling and install 4 - 3 x 9 mm screws.Install Trim Piece1. Install the 3 trim brackets onto the top of the range hoodusing 6 - 3 x 9 mm screws. Do not completely tighten thescrews, to allow adjustments.2. Remove the protective film from the unpainted side of thetrim piece.3. Apply protective adhesive tape along one edge of the trimpiece on the unpainted side.4. Insert the trim piece with the protective adhesive tape sidefacing out.5. Adjust brackets to firmly hold the trim piece and tighten allscrews.A. Upper vent coverB. Lower vent coverC. Vent cover bracketD. Install 3 x 9 mm screws.E. Upper vent cover bracketA. Top of range hoodB. Trim bracketsDBC DAEABA. Protective filmA. Protective adhesive tapeB. Correct adhesive tape locationA. Protective adhesive tape side facing outB. Painted side facing in.AABAB