Whirlpool 29 Installation Instructions Manual

Also see for 27': Installation instructions Installation instructions Installation instructions Installation instructions Job aid

Contents

20Check door strike alignment11.Close door and check that door strike aligns with door catch.If it is needed, slide door catch left or right within slot toadjust alignment.Insert screws in hinge holes ondryer cabinet10.NOTE: 2 people maybe needed to reinstall door.Insert screws into the bottom holes on left side of dryercabinet. Tighten screws halfway. Position door so large end ofdoor hinge slot is over screws. Slide door up so screws are inbottom of slots. Tighten screws. Insert and tighten top screwsin hinges.27" Wide Model Side-Swing Door with GlassPlace towel on dryer1.Place towel on top of dryer to avoid damaging the surface.Lift door until top screws in dryer cabinet are in large part ofhinge slot. Pull door forward off screws. Set door (handle sideup) on top of dryer. Remove top screws from dryer cabinet.Lift door off top screws3.Remove bottom screws2.Open dryer door. Remove bottom screws from dryer cabinetside of hinges. Loosen (do not remove) top screws from dryercabinet side of hinges.Remove screws attaching hinges to door.Remove screws from hinges4.

/ 22

Related manuals for Whirlpool 27'