Menu
WavHello SoundBub Instruction Manual
  |
Portable Rechargeable BluetoothSpeaker and SootherThank you for purchasing a SoundBub. In addition to the 2 pre-set white noisetracks, this 0+ safety rated product is designed to provide high quality wirelesssound for your mobile device, tablet, computer or other Bluetooth audio device.This instruction booklet explains the basic operation and care of the unit.Please read it carefully and keep for future reference. Additional informationabout the SoundBub as well as digital versions of these instructions can befound at wavhello.comDIRECTIONS FOR USEPlease read all instructions carefully.Micro USBPortRed/GreenLED1. CHARGING THE SOUNDBUBPlug the included MICRO USB CABLE intothe MICRO USB PORT on the lower backpanel of the Soundbub and connect theother end to your computer or wall outletuntil the unit is charged.• The LED light will change from red togreen when fully charged.• The LED will blink red whenever thebattery is low.5. HIDE-AWAY HANDLE3. PLAYING WHITE NOISEThe SoundBub comes with two preset white noisetracks for your convenience.Move the switch to ON.• Press the Belly Button once to play Malibu Waves.• Press again to play Montana Rain.• Pressing a third time will pause the sound.• The next press will start the cycle again.SoundBub has a safe maximumvolume level so it never getstoo loud.The HIDE-AWAY HANDLE makes it easy for little hands to hold or carry theSoundBub. And it is flexible enough to conveniently hook onto a crib, stroller, carseat or most anywhere you and your child travel.Also, when placed on a flat surface, the handle doubles as a stand to help keepthe SoundBub upright.CONTENTSMicro USB CableTo recharge your SoundBubSoundBubBluetooth speaker and sootherFree music download code is located on the back cover of the WavHello booklet(included in package)2. TIMERSThe SoundBub comes with four TIMERS:30, 60, and 90 minutes as well as continu-ous play, represented by the symbol ∞.The timers work for both the white noiseand the Bluetooth options.• When playing white noise, the timer willstart when the BELLY BUTTON is pressedand will reset if switched to a new track.• When playing through Bluetooth, thetimer starts when the switch is moved tothe Bluetooth side.• The timer will continue to count downeven if the audio is paused.• Feel free to switch to a different timelimit while audio is playing.NOTE: The continuous play option applies to whenthe unit is connected to a power source. If notconnected to a power source, the running time forthe battery is approximately 2 hrs. (standby onlyis approximately 120 hrs.)INSTRUCTION MANUALstandbystandbyvoltage of battery is below 3.5Vthe battery is being chargedthe battery is fully chargedconnected to devicePositionSwitched“ON” whiteonononslow blinkingblinkingblueredgreenSwitchedtoBluetoothon backlowerpanelColor6. LED STATUSplay sound of waveplay sound of rainconnecting BluetoothDescriptionononslow blinkingquick blinkingStatusOn your device, navigate to your Bluetooth settings and connect with “Sound-Bub”. Once connected, you will hear a *beep* and the LED will change to a solidblue. Your SoundBub is now ready to play content from the VoiceShare byWavHello mobile app or any other content platform on your device.NOTE: Pressing the Belly Button while in Bluetooth mode will pause and re-startthe sound.4. PAIRING WITH BLUETOOTHMove the switch to the Bluetooth symbol. The blue LED will blink which means itis ready to be paired with a device.VolumeHide-Away Handle as Hook Hide-Away Handle as StandBelly Button |
Related manuals for WavHello SoundBub
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved