Waterworks On Tap OTKM10 Installation Manuallines

Waterworks On Tap OTKM10 Installation Manuallines Manual pdf 1 page image

STYLE No. OTKM10, OT10KMOn Tap One Hole High Profile Kitchen Faucetwith Metal Wheel, Black Ball Handle and SprayINSTALLATION GUIDELINESPAGE 1 OF 5 | UPDATED ON 8.1.2018PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COMIMPORTANT: To ensure this product is installed properly, you must read andfollow these guidelines. The owner/user of this product must keep this information forfuture reference. This product must be installed by a professional licensedcontractor. Be sure your installation conforms to federal, state, and localcodes. In the State of Massachusetts, all installations must complywith the rules and regulations set forth within 248 CMR. Inspect this product to ensure you have all the parts required forproper installation. Product is sold partially assembled but shownfully disassembled for illustrative and service purposes only. Use only a strap wrench or protected/smooth-jaw wrench on anyfinished surface. The use of certain plumber’s putty may stain stone or tile surfaces. If further assistance is required, please contact Product Support at1-800-927-2120 Monday through Friday, 8am – 6pm EST. Refer to the separate Service Parts Documents for availablereplacement parts.TECHNICAL DETAILS:DETAIL SPECIFICATIONADJUSTABLE VERSUS FIXED SPRAY FIXEDMAXIMUM DECK THICKNESS 1-15/16” [49mm]FITTINGS HOLE DIAMETER 2” [51mm] - (FAUCET)1-1/2” [38mm] - (SPRAYER)HANDLE TURN ANGLE QUARTER TURNINLET CONNECTION 3/8” COMPRESSION CONNECTOR HOSES ‡RESTRICTED MAXIMUM FLOW RATE 2.2gpm [8.3L/min]SPOUT REACH 10-1/8” [257mm]SPOUT SWIVEL YESSPRAY HOSE LENGTH 49” [1.2m]SPRAY INCLUDED IN UNIT YESWATER PRESSURE RANGE 20psi [1.5 bar] MIN85psi [6.0 bar] MAXWATER PRESSURE RECOMMENDED 45psi [3.0 bar]‡ UK Style No. OT10KM is supplied with 2 BSPP adapters, assembly required.†† SPRAY can be installed on RIGHT or LEFT side of FAUCET[MOUNTING SURFACE – TOP VIEW]Ø2"[51mm]FAUCETFITTINGSHOLEØ1-1/2"[38mm]SPRAYFITTINGSHOLE3-1/8"[79mm]FROM CENTER TOFINISHED WALL/BACKSPLASHBACKSPLASH/FINISHED WALLMINIMUM

/ 5

Related manuals for Waterworks On Tap OT10KM