WarmFlow Agentis Series Manual

Contents

WarmFlow Agentis Series Manual Manual pdf 66 page image

Page 656.6.1 Programming CH Time Slots1. From the Home Screen, press the Time Programming button (4) for 3 seconds.2. The LCD will display ‘tinE’ representing Time. Note: This menu can only be accessedif the internal time programmer is enabled for CH. See sections 11.7.1 and 11.7.2for enabling the programmer.3. Press the DHW+ button (1) to select CH Time Programming, the radiator icon willflash when selected.4. Press the Mode button (3) for 1 second to enter the CH Time Programming Menu.5. The word will flash. Use the DHW+ button (1) or DHW- button (2) to select theday to be modified.6. Press the Mode button (3) for 1 second to modify the Time Slots for the selected day, theday number (1-7) will flash.7. Press the DHW+ button (1) or DHW- button (2) to select the Time Slot to be modified,indicated by the Time Slot Identifier on the left side of the LCD . There are 4 timeslots represented by the 4 blocks of the Time Slot Identifier.8. To modify the displayed Time Slot, Press the Time Programming button (4) for 1second, the time to be modified will flash. The on time is shown in the main digitswith ‘ON’ to the left of the time. The off time is shown in the axillary digits with‘OFF’ to the left of the time.9. Change the time as required using the DHW+ button (1) or DHW- button (2).10. Confirm the setting and move to the next time to be modified by pressing the TimeProgramming button (4).11. When finished programming the off time, confirm the setting by pressing the TimeProgramming button (4) which will return the LCD to step 7 allowing another time slot tobe selected. To select a different day for programming, return to step 5 by pressing theMode button (3) for 1 second.