WAGNER ProSpray 3.29 Owner's Manual

Also see for ProSpray 3.29: Operating manual Owner's manual Original operating manual Operating manual

WAGNER ProSpray 3.29 Owner's Manual Manual pdf 39 page image

39general view Of applicatiOnPS 3.29 / 3.312 GeNeRAL VIeW oF APPLIcATIoN2.1 APPLIcATIoN2.2 coATING mATeRIALSPRoceSSIBLe coATING mATeRIALSi Pay attention to the Airless quality of the coatingmaterials to be processed.Dilutable lacquers and paints or those containing solvents, two-component coating materials, dispersions, latex paints, releaseagents, oils, undercoats, primers, and fillers.No other materials should be used for spraying withoutWagner’s approval.FILTeRINGDespite suction filter and insertion filter in the spray gun,filtering of the coating material is generally advisable.Stir coating material before commencement of work.i Attention: Make sure, when stirring up withmotor-driven agitators that no air bubbles arestirred in. Air bubbles disturb when spraying andcan, in fact, lead to interruption of operation.VIScoSITyWith this unit it is possible to process highly viscous coatingmaterials of up to around 25.000 MPa·s.If highly viscous coating materials cannot be taken in by suction,they must be diluted in accordance with the manufacturer’sinstructions.TWo-comPoNeNT coATING mATeRIALThe appropriate processing time must be adhered to exactly.Within this time rinse through and clean the unit meticulouslywith the appropriate cleaning materials.coATING mATeRIALS WITH SHARP-edGed AddITIoNALmATeRIALSThese have a strong wear and tear effect on valves, high-pressure hose, spray gun and tip. The durability of these partscane be reduced appreciably through this.materials object SizemodelPS 3.21PS 3.23PS 3.25PS 3.29PS 3.31PS 3.34PS 3.39Release agents, oils, undercoats, primers, fillers,synthetic resin-based paints, acrylic paintsrecommended nozzle size: FineFinish 0.008“ - 0.014“up to 200 m2200 m2 - 800 m2more than 800 m2Emulsion paints, latex paintsrecommended nozzle size: 0.017“ - 0.027“up to 200 m2200 m2 - 800 m2more than 800 m2Anti-corrosive agents, flame retardants, fabricadhesiverecommended nozzle size: 0.021“ - 0.031“up to 200 m2200 m2 - 800 m2more than 800 m2Airless-scrapersrecommended nozzle size: 0.027“ - 0.039“up to 200 m2200 m2 - 800 m2more than 800 m2= Recommended = Not-recommended