Menu
WAC AiSPiRE A2D50-60 Installation Instruction
    |
INSTALLATION INSTRUCTION24VDC Dim-To-Warm POWER SUPPLYA2D50-60, A2D50-96waclighting.comPhone (800) 526.2588Fax (800) 526.2585Headquarters/Eastern Distribution Center44 Harbor Park DrivePort Washington, NY 11050Central Distribution Center1600 Distribution CtLithia Springs, GA 30122Western Distribution Center1750 Archibald AveOntario, CA 91761AiSPiRE retains the right to modify the design of our products at any time as part of the company's continuous improvement program. March 2022 1.SAFETY INSTRUCTIONIMPORTANT: NEVER attempt any work without shutting off the electricity.• Always turn off power at fuse box prior to installation to prevent electrical shock.• For installation and serviced by a qualified, licensed electrician.• Install in accordance with national electric code, and local regulations.• Consult with local inspector to assure compliance.CAUTION• Read all instructions before installing.• Handle product with care.• Do not modify or disassemble product beyond instructions or warranty will be void.• Failure to follow safety warnings, and installation instruction will void the warranty• This power supply is designed to work with only AiSPiRE Dim-To-Warm tape light.FEATURES• Protection: short circuit/over loading/over temperature• 24VDC Output, 4A Max (96W) & 2.5A Max (60W) Output Current on each output channel, ≥ 0.9 pf• Ambient Temp: -20ºC to 45ºC (-4°F to 113°F)• Full protection aluminum housing for dry and damp locationPRODUCT DIMENSION:60W & 96W |
Related manuals for WAC AiSPiRE A2D50-60
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved