Velleman CAMSCB2 Quick Start Manual

Contents

technical specifications

Velleman CAMSCB2 Quick Start Manual Manual pdf 1 page image

CAMSCB2 1 VELLEMANCAMSCB2 – B/W CCD CAMERA1. IntroductionTo all residents of the European UnionImportant environmental information about this productThis symbol on the device or the package indicates that disposal of the device after its lifecycle could harmthe environment.Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialisedcompany for recycling.This device should be returned to your distributor or to a local recycling service.Respect the local environmental rules.If in doubt, contact your local waste disposal authorities.Thank you for buying the CAMSCB2! If the device was damaged in transit, contact your dealer. Verify if all parts areincluded: a camera, a hex wrench, a CS-C adapter ring, an Auto Iris lens connector and an instruction manual.2. Features• Horizontal resolution of 380 TV lines• Built-in Auto Electronic Shutter (AES)• Minimum illumination of 0.25 lux / F2.0• Signal-to-noise ratio of 48dB• Long life and high reliability3. Controls and Connectors (fig. 1)1. Flange ringSuitable for CS-mounted lenses. To install a C-mounted lens, use a CS-C conversion ring.2. Flange ring fixation screwThe camera is set at a standard focal position. Depending on the type of lens, a slight adjustment may benecessary. Adjust the back focus lens by turning the focusing knob.3. Auto iris lens connectorSupplies power and control signals to the auto iris lens (when mounted).4. DC drive level adjustmentAdjust the DC drive level for the brightness of the video output when using a Direct Drive lens.5. Power LEDIndicates normal operation.6. 12VDC input terminalTo connect the 12VDC regulated power supply.7. Video output connector (VIDEO OUT)To connect the camera to the VIDEO IN connector of the monitor