Menu
Veeder-Root C628 Series Technical Manual
            | |
4VEEDER-ROOT82345 POP1OP2PGM RSTO P E R A T I O NFRONT PANELDown Key Scroll Key Program Key Reset KeySecondary DisplayScrollDown In Operation Mode: Used in edit operation to decrementthe digit highlighted by the Scroll key.In Program Mode: Used in Edit Operation to decrementthe digit highlighted by the Scroll key, if the setting isa numerical value, or present the next in the series ofchoices for that parameter.Program In Operation Mode: Used to move between theparameters and to enter an edited preset value.Holding the key down for 3 seconds will cause theunit to enter Program Mode.In Program Mode: Used to move from one parameter tothe next and enter the edited parameter values.Holding the key down for 3 seconds will cause theunit to return to Operation Mode.In All modes: Moves the unit into Edit Operation,which is indicated by the left most digit flashing.Successive presses of the key are used to move to thedigit to be edited. Wrap around will occur from leastsignificant digit to most significant digit.Reset In Operation Mode: Resets the count value, batchvalue, or background total to zero (or to the preset incount down operation). Parameter must be displayedto be reset. This button can be disabled via the "FrontPanel Reset Enable" parameter in Program Mode.In Program Mode: No function.In All modes: Will abort an Edit Operation and returnthe preset/parameter to its previous value.Down &ScrolltogetherKeyPrimary In Operation Mode: Default display is the count value.Can be scrolled using the program key to display theother parameters. If the "Help" function is enabled,this display will first show the parameter descriptionfor 3 seconds (see page 5 for example).In Program Mode: Displays the value or selection forthe current parameter. If the "Help" function isenabled, this display will first show the parameterdescription for 3 seconds (see page 6 for example).Secondary In Operation Mode: Indicates alphabetically whetherPreset, Batch Value, Batch Preset, or Background Totalis being viewed on the primary display. This display isblank when Count Value is being shown.In Program Mode: Provides a 1 digit alpha or numericcharacter to indicate which parameter value is beingshown on the primary display.OutputIndicatorsIn Operation Mode: OP1 illuminates when Output 1 isactive. OP2 illuminates when Output 2 is active.In Program Mode: No function.Display FunctionsKey FunctionsFunction Display FunctionOutput IndicatorsPrimary Display |
Related manuals for Veeder-Root C628 Seriec
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved