|
19.0 Panel Mount PC 486-0010-01-0210Award BIOS UtilityThe Phoenix-Award BIOS provides users with a built-in Setup program to modify basic systemconfiguration. All configured parameters are stored in a battery-backed-up RAM (CMOS RAM) to savethe Setup information whenever the power is turned off.Entering SetupThere are two ways to enter the Setup program. You may either turn ON the computer and press immediately, or press the and/or , , and keys simultaneously when thefollowing message appears at the bottom of the screen during POST (Power on Self Test).TO ENTER SETUP PRESS DEL KEYIf the message disappears before you respond and you still want to enter Setup, please restart thesystem to try it again. Turning the system power OFF and ON, pressing the “RESET” button on thesystem case or simultaneously pressing , , and keys can restart the system. If you donot press keys at the right time and the system doesn’t boot, an error message will pop out to promptyou the following information :PRESS TO CONTINUE, OR TO ENTER SETUPControl KeysUp arrow Move cursor to the previous itemDown arrow Move cursor to the next itemLeft arrow Move cursor to the item on the left handRight arrow Move to the item in the right handEsc keyMain Menu -- Quit and delete changes into CMOSStatus Page Setup Menu and Option Page SetupMenu -- Exit current page and return to Main MenuPgUp/“+” key Increase the numeric value or make changesPgDn/““ key Decrease the numeric value or make changesF1 key General help, only for Status Page Setup Menu andOption Page Setup Menu(Shift) F2 key Change color from total 16 colors. F2 to select colorforward, (Shift) F2 to select color backwardF3 key ReservedF4 key ReservedF5 key Restore the previous CMOS value from CMOS, onlyfor Option Page Setup MenuF6 key Load the default CMOS value from BIOS default table,only for Option Page Setup MenuF7 key Load the Setup default, only for Option Page SetupMenuF8 key ReservedF9 key ReservedF10 key Save all the CMOS changes, only for Main Menu
|
