Vanco EVSP14VW Manual

Contents

Vanco EVSP14VW Manual Manual pdf 7 page image

800.626.64457CONNECTION DIAGRAMCONNECT AND OPERATE1. Connect a source such as a PC, Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver,etc. to any of the analog or digital inputs on the unit. Inputs include analog VGA or composite, and digitalUSB or HDMI2. Connect displays such as an HDTV or HD Projector to the HDMI output(s) of the unit3. Connect an additional EVSP14VW to the “LOOP OUT” port to add more displays for a larger video wallsetup (OPTIONAL)4. For power, connect the provided power supplyRouterComputer ComputerDVD/Blu-Ray PlayerDVD/Blu-Ray PlayerIR TXHDTVVideo Wall2.0 AudioStereo AmplifierAt this point the display connected should display the source signal connected to the unit. If no signal is beingdisplayed, check all HDMI cables connected. If a display is having difficulty receiving a signal, access thedisplay’s menu and adjust the resolution (lowest to highest until signal is displayed). A 24 Hz vertical refreshrate may work better than 60 Hz or higher.IR EXTENSIONThe EVSP14VW can be controlled via IR with the included IR remote control. The front panel of the processorhas an IR sensor that can be pointed to, or as an option, can be hidden and be controlled by the included IRReceiver (RX).Simply connect the IR Receiver (RX) into the “IR-EXT” port on the back of the unit. The IR Receiver (RX) pigtailcan be led out to an area where the IR remote control can still reach it line of sight while the main unit ishidden.