3011 Firmware Update & Installation of AppsThenew FIRMWARE can be updated by OTA (Over the Air) when there is new firmwareavailable. The information dialog will be pop-up when there is new firmware.Here’s the step.1) Prepare more than 128MB free space of USB flash drive or HDD.2) Connect this flash drive or HDD to USB host port.3) Go to “Settings” icon System Tab and select “Firmware Upgrade”.4) The firmware will be downloaded at the USB drive you connected and automaticallyupdated.Theapplication can be installed from MARKET application we bundled (1 Mobile Market).If you download many applications from market, internal NAND memory can be full. In thiscase you need to install the extra SD card into the SD slot for moreapplications. Then more application can be downloaded and installed.Some applications are initially configured to be downloaded and installed into SD card only,not internal memory.
