3.12.8 Using the lifting/lowering switchWhen attaching implements, using the lifting/lowering switch gives you a fullcontrol on the implement's movement. If necessary, you can stop the movementimmediately by releasing the switch.The lifting/lowering switch functions even when the rear linkage is not activated.1GUID-F1E65AD2-AB04-45E2-A851-4BDD243C087B1. Lifting/lowering switch• To lift the linkage, press the symbol side of the lifting/lowering switch.The longer the switch is pressed the faster the linkage lifts.• To lower the linkage, press the side of the lifting/lowering switch opposite tothe symbol.The longer the switch is pressed the faster the linkage lowers.• To stop the movement of the linkage, release the lifting/lowering switch to thecentre position.NOTE: The linkage has to be activated again every time the lifting/loweringswitch or the lifting/lowering push buttons have been used, if necessary.3.12.9 Using the lifting/lowering push buttonsWhen using the lifting/lowering push buttons, the lifting/lowering continues for aslong as you keep pushing the respective button. The movement stopsimmediately when releasing the button. Thus, you have steady control over thelinkage movements.3. Operation- 174 -
