Valcom V-1097 Quick Start Manual

Valcom V-1097 Quick Start Manual Manual pdf 1 page image

Issue 11 947529ONE-WAYV-1097One-WayPageControlUnitAMPLIFIEDTip - BrownRing - WhiteRing - GreenTip - Red OUTPUTINPUTSPEAKERTALKBACKV-1097TalkbackPageControlUnitSPEAKERTip - BrownRingRingTip - Red OUTPUTINPUTV-1097SLIDE VOLUME CONTROLINTRODUCTIONThe V-1097, Slide Volume Control, is a ValcomVolume Control Unit which can be mounted intoa single-gang electrical box. This unit iscompatible with all Valcom one-way and two-wayspeakers.NOTE: The V-1097 is not designed toconnect directly to the output of highpowered amplifiers.SPECIFICATIONSApplications To control volume of one-way amplifiedspeaker assemblies in inaccessible areas To control large groups of one-way amplifiedspeaker assemblies To control volume of Valcom talkbackspeakersDimensions/Weight 4.50"H x 2.75"W x 1.25"D(11.43cm H x 6.99cm W x 3.18mm D) Weight: .25 lbs. (0.11 kg)ConnectionsConnections when using a One-WayControl Unit(Refer to Figure 1) Connect wall mount volume control input tipand ring to desired zone output leads frompage control. Connect wall mount volume control outputtip and ring to speakers.Connections when using a Talkback Control Unit(Refer to Figure 2) Connect wall mount volume control tip inputterminal to tip output lead of talkback pagecontrol unit. Connect wall mount volume control tipoutput terminal to tip lead of talkbackspeaker. Connect ring output of talkback page controldirectly to ring of talkback speaker, (do notconnect to V-1097).MountingSurface Mounting - Mount standard single-gangelectrical box. Install faceplate onto electricalbox.Flush Mounting - Install faceplate onto standardsingle-gang electrical box.Figure 1. One-Way ConnectionFigure 2. Talkback Connection

/ 2

Related manuals for Valcom V-1097