Vacron CDR-E07 User Manual

Also see for CDR-E07: Quick start guide Firmware update instructions

Contents

Vacron CDR-E07 User Manual Manual pdf 15 page image

11H. Start / Stop RecordingWhen power on the device, the screen will show a welcome message for thedevice starts if connected to TV-Out. The firmware version of the device willdisplayed before LIVE view of recording starts.1. Power on / Start RecordingThe device can be started completely after power on for one minute.When the device is started on programming, the green indicator light isflicker before GPS positioning completed. After one minute, the redindicator light will be kept flicker until show n on right side of LIVEview; the device starts recording now.Definition of Indicator● Force record button: good for using at night● Red indicator of REC:Stable flicker of red indicator: On recordingFast flicker of red indicator: Force recording● Green indicator of GPS positioning:Flicker of green indicator: GPS 3D positioningSteady of green indicator: GPS 3D positioning accomplished.2. Power Off / Stop RecordingPower off and then remove the memory card to read the recording filein computer.Force Recording Button IR LEDRecording IndicatorGPS Indicator