Menu
VCS VideoJet 1000 Manual
Also see for VideoJet 1000: Manual
                                                                                                          | |
Contents
| 
Installation27VideoJet 1000Setup using a terminal programData terminal A data terminal may be connected to the VideoJet 1000 for setupand local control. The data terminal usually consists of a computerwith suitable terminal software. A standard serial cable is requiredfor the connection.HyperTerminal, which comes with Windows, can be used as the ter-minal program.) Before working with the terminal program, isolate the unit from thedata network.) Connect the sub-D socket COM2: RS232 of the VideoJet 1000 to afree serial port on the computer.TerminalconfigurationTo establish communications between the Terminal program andthe VideoJet, the transmission parameters must be correctly setup.The following parameters should be selected in the Terminal pro-gram:z 19,200 Baudz 8 Data bitsz No parity checkz 1 Stop bitz No protocolNoteInformation on the installation and use of HyperTerminal can befound in the documentation or in the Online Help for MS Windows. |
Related manuals for VCS VideoJet 1000
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved