|
DVR User’s Manual293.6.8 Per Channel ConfigThis menu is used to configure the <Motion Detect>, In> and Out> settings for each channel. The menu isdisplayed as below.Per Channel ConfigChannel SelectVideo Loss DetectMotion DetectDetection ConfigAlarm InAlarm OutCH01OffOffENTEROFFOFF3.6.8.1 Channel SelectThe item is used to select a desired channel for setting the parameters. Movethe cursor to and press ENTER, then select a channelusing UP / DOWN keys. Press ENTER again to confirm the selection.3.6.8.2 Video Loss DetectThis item allows users to enable or disable Video Loss as an alarm event.Select to enable Video Loss alarm events, or to disable.3.6.8.3 Motion DetectThis item allows users to enable or disable motion detection function of theDVR. Select to enable Motion Detect alarm events, or to disable.If motion detection function is enabled, it is required to define motiondetection parameters such as detection area and sensitivity settings in.3.6.8.4 Detection ConfigurationIf motion detection function is enabled, it is required to define the motiondetection parameters such as detection area and sensitivity settings. Select achannel for setting the parameters, move the cursor to and press ENTER. The Detection Configuration menu displays as follows.Detection ConfigDetected Area SetupSensitivityBlock ThresholdENTER88%4
|
