Menu
VARIZOOM VZ-TFT-7 Quick Start Manual
  |
VZ-TFT-7 7” 16:9 ColorTFT LCD MonitorIMPORTANT NOTE: Your monitor comes supplied with an AC/DC power adapter. Depending on theaccessories you purchase, you can power and use the monitor in a variety of ways. USING A POWERSOURCE NOT SUPPLIED BY VARIZOOM COULD LEAD TO MALFUNCTION OR DAMAGE NOT COVEREDBY YOUR WARRANTY. IF YOU PLAN TO USE A POWER SOURCE FROM ANOTHER MANUFACTURER,MAKE SURE THE VOLTAGE AND POLARITY ARE CORRECT TO PREVENT DAMAGE.1. You must connect the RCA video cable (from your camera) and theDC power source connector to the molded connector housing attachedto the back of the monitor. Plug the RCA video cable into theoutermost RCA connector (A) and the power source connector into theDC jack (B). Notes: Many pro cameras have BNC video out instead ofRCA. RCA/BNC adapters are available at most video supply stores.The middle RCA connector is not active on the 7” monitor.2. Turn on the POWER and see if the image from your camera appears onscreen. Dependingon your camera’s aspect ratio capabilities, you may want to change the SCREEN MODE(button “S”). Pressing the S button will cycle the monitor through its various display modes(Normal, Wide).- If shooting in 4:3 mode, select Normal to display the image in its natural 4:3 aspect ratiowith black bars along the sides.- If you are shooting in 4:3 mode, but you wish to use the full screen, select Full, and theimage will be stretched horizontally to fill the screen. Full mode will stretch the imageevenly across the whole screen.- If shooting in 16:9 mode, select Full to display the image in its natural 16:9 aspect ratioSafety Warnings1. When using AC power, to prevent fire or shock hazard, do not expose this equipment to high humidity or dust. Do not use it in an unprotected outdoorinstallation or any area classified as a wet area.2. The operating temperature should be kept between 32 -140 degrees Fahrenheit. Avoid extreme changes of temperature.3. Do not disassemble the unit, attempt to service it, or put it on an unstable base. Do not drop it and avoid heavy impact.4. Ventilation: Openings in the enclosure are provided for ventilation (to protect it from overheating). These openings must not be blocked or covered. Thisunit should not be placed in a built-in installation unless proper ventilation is provided.5. Cleaning: Unplug the unit from the outlet before cleaning. Do not use liquid or aerosol cleaners, use only a damp cloth.6. Overload: Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.7. Never force objects or liquids into any opening of the unit –electrical shock and/or damage not covered by your warranty may result.SpecificationsDisplay: 7” Color TFT-LCD Power Consumption: 4.5W max.Active Area: 6.12” w x 3.45” h Viewing Angles: 30/60/60/60 (Top/Bottom/L/R)Resolution: 1440 w x 234 h pixels (480x240 lines) Video System: NTSC/PAL autoswitchOverall Dimensions: 7.6” w x 4.17” h x 0.98” d Video Input: 1V p-p (positive) 75 ohmLuminosity: 250 nit TYP Power Input: 10-17 VDCInput Terminals: Power, RCA Video Operating Temp: 32-140 FPicture Adjustments: Color, Brightness, Contrast Operating Humidity: 85% RH maxAspect Ratio Modes: Full(16:9), Normal (4:3) Weight: 0.84 lb.-You may notice tiny red, blue, or green spots on the panel. This is a characteristic of LCD panels and isn’t indicative of a problem. The high-precision panel has at least 99.99% effective image pixels, but on .01% of the panel there may be missing or constantly lit pixels.AB |
Related manuals for VARIZOOM VZ-TFT-7
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved