VARIZOOM MEDIA RIG Manual

VARIZOOM MEDIA RIG Manual Manual pdf 1 page image

VZ-DVMediaRigProfessional Camera SupportKit includes: (1) Adjustable ShoulderArch (2) Handle Section (3) Belt (4)Spring Pod (5) Quick-release Plate (6)Tilt Lever (7) Accessory Mount (8)Swiveling counterweight (may differ frompicture)WARNING: NEVER POINT THE TIP OF THE SPRING POD AT YOUR FACE. ONLY LOOSENTHE CLAMPS WHEN THE SPRING POD IS ATTACHED TO THE LOADED DV MEDIA RIG. THESPRING POD CAN POP OUT QUICKLY AND CAUSE INJURY IF THESE RULES ARE NOTFOLLOWED.1) Connect the handles to the shoulder arch bysliding the smaller end of the handleassembly through the stainless steel cylinder.Secure the two sections together by insertingthe tilt lever (6) through the stainless steelcylinder and threading it into the handlesection. The tilt lever adjusts the tension onthe tilt action of the handles. The position ofthe lever can be adjusted without loosening –simply grab the lever and press on the redbutton, then adjust the angle of the lever.2) The swiveling counterweight can be adjusted to the left or right tocompensate for balance issues created by the camera and othermounted accessories. For now, tighten the pivot knob thoroughlyso it doesn’t move while you are mounting the camera andaccessories and making adjustments to the Rig.3) Attach the quick-release plate to your camera using the appropriate screw. Remove theunused screw and store in a secure location. Once the quick-release plate is firmly attached toyour camera, set it aside.4) Attach the belt to your waist with the holster facing front. Take the spring pod and insert theflat end into the holster, making sure to run the pod through the D-ring at the top of the holster.Do not loosen the spring pod clamps yet.12\2\3\2\4\2\5\2\6\2\7\2\8\2\6\2\

/ 2

Related manuals for VARIZOOM MEDIA RIG