VADDIO WALLVIEW CCU HE100 Installation And User Manual

Contents

general specifications

VADDIO WALLVIEW CCU HE100 Installation And User Manual Manual pdf 1 page image

Installation and User GuideCamera and Electronic Products for Integrators©2010 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications andpricing subject to change. Vaddio, WallVIEW, HSDS, Quick-Connect, EZIM, ProductionVIEW, PreVIEW, EZCamera and PowerRite areregistered trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 341-789 Rev. BWALLVIEW™ CCU HE100 WITH HSDS™Vaddio™ Quick-Connect™ CCU System for the Panasonic® AW-HE100 PTZ CameraOVERVIEWThe Vaddio WallVIEW CCU HE100 (Figure 1) is built for use withthe Panasonic AW-HE100 high definition PTZ Camera. Vaddio’sHE-100 camera is designed for easier integration where thestandard Panasonic RS-422 control is converted to RS-232 foroperation with our complete line of ProductionVIEW PTZ cameracontrollers and seamless switchers.The Quick-Connect CCU HE100 allows the user to control thecolor output of the camera’s image sensor, through both Redand Blue Gain knobs Detail, as well as Iris and Gain levels, toprovide a higher quality image. In addition, there are alsoPedestal, Gamma and Chroma adjustments for added fine-tuning of the camera’s image. The system uses high speeddifferential signaling (HSDS), an active transmission system thatdelivers low-loss, high-quality video over CAT-5 cablingdistances up to 500’ (152.4m).The system is capable of high definition (HD) 1080i or 720p component video and has a simultaneous SDcomposite video output. The AW-HE100 comes in either NTSC or PAL formats. The Quick-Connect CCUfor the HE-100 has many new features, including Tally illumination on the camera which allows the presenterto know which camera is live, as well as Genlock delivered to the camera over CAT-5.INTENDED USEBefore installing the Vaddio WallVIEW CCU Camera System, please read the entire manual thoroughly. AllVaddio camera systems are designed for use indoors. Outdoor operation is not recommended, has not beentested, and could damage the camera and/or create a potentially unsafe operating condition. Use only theVaddio PowerRite power supply provided.SAVE THESE INSTRUCTIONSThe information contained in this manual will help you install the Vaddio WallVIEW CCU system. Forreference, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent productdrawings for the Vaddio product line on the website. These documents can be downloaded fromwww.vaddio.com free of charge.IMPORTANT SAFEGUARDSRead and understand all instructions before using. Do not operate any electrical device if it has beendropped or damaged. In this case, a Vaddio technician must examine the product before operating. Toreduce the risk of electric shock, do not immerse in any liquids and avoid extremely humid conditions.INFORMATIONFor RS-422 control information, please see the full-length Manual for the PANASONIC AW-HE100 posted onthe Vaddio or Panasonic website. Vaddio has also prepared a number of TechNotes, specifications anddrawings designed to inform and educate integrators on the value and the specific uses of Vaddio products.Figure 1: Quick-Connect CCU HE100System with Camera (not included), WallMount and EZIM CCU (behind camera)Use only the approved power supplies provided with the system.Use of any unauthorized power supply will void any and allDo not use RJ-45 “pass-thru” connectors. Use standard RJ-45connectors for best results.