Unitronics Vision V130-T2 User Manual

Also see for Vision OPLC V130-J-B1: User guide Installtion Guide User guide

Unitronics Vision V130-T2 User Manual Manual pdf 1 page image

Unitronics 1Vision™PLC+HMI User GuideV130-33-T2/V130-J-T2V350-35-T2/V350-J-T2V430-J-T2▪ 12 Digital Inputs, including 2 Analog,3 HSC/Shaft-encoder inputs▪ 12 Transistor OutputsGeneral DescriptionThe products listed above are micro-PLC+HMIs, rugged programmable logic controllers that comprisebuilt-in operating panels.Detailed Installation Guides containing the I/O wiring diagrams for these models, technical specifications,and additional documentation are located in the Technical Library in the Unitronics website:https://unitronicsplc.com/support-technical-library/Item V130-T2V130J-T2V350-T2V350J-T2V430J-T2On-board I/O Model DependentScreen 2.4" 3.5" Color Touch 4.3" Color TouchKeypad Yes NoneFunction Keys None YesCom Port, Built-inRS232/485 Yes Yes Yes* Yes* Yes*USB device,mini-B None None Yes* Yes* Yes*Com Ports, separateorder, user-installedThe user may install a CANbus port (V100-17-CAN), and one of the following:• RS232/RS485 port (V100-17-RS4/V100-17-RS4X)• Ethernet (V100-17-ET2)• Profibus Slave (V100-17-PB1)* V430J/V350/V350J comprises both RS232/485 and USB ports; note that only one channel may be used at a time.Standard Kit ContentsItem V130-T2V130J-T2V350-T2V350J-T2V430J-T2Controller YesTerminal Blocks YesBattery (installed) YesSlides(2 sets of key labels) None Yes NoneMounting Brackets Yes (2 parts) Yes (4 parts)Rubber Seal Yes