Menu
Unitron Johansson TITANIUM 8700 User Manual
                  | |
8700 – 8701 TITANIUM7Connecting the module(s) to a network with DHCPTo connect the module(s) to a network, go to the Management Port in the webinterface.Tick Obtain IP address from DHCP and give each Titanium a unique hostname (forinstance: http://8701). Click apply to confirm. Now the module can be accessed viahttp://hostname (for instance: http://8701) or check your DHCP server for IP address.DEVICE CONFIGURATIONIt is of utmost importance that your device is configured in a right way in order to make theTitanium installation successful. To do so, follow the below mentioned steps carefully.1. Login5. After the web interface opens (see previous step), the home page with anoverview of active services appears. On this screen, you see information aboutthe output MUXs, the CAM status and the chosen TV services.6. In the top right corner, you will see the device status. If the status “LED” isgreen, there are no alarms. When you move your cursor over the status “LED”,the alarm status will appear.7. By clicking on login, you can log in to the module. Use the password “admin”.8. ! change the password as soon as you log in to the module viaManagement Port”!9. After logging in, the Overview window will appear again. The menu structure ofthe web interface can be found in the left column. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved