Unitech RH767 User Manual

Also see for RH767: Programming manual Programming manual Specifications Quick reference guide Quick reference guide

Unitech RH767 User Manual Manual pdf 25 page image

Chapter 2 Using the Hardware17Using the StylusCAUTION! Never use anything other than the RH767 stylus on the screen. Otherwise thiscould cause a permanent damage.1. Remove the stylus from its holder.2. Hold the stylus as you would a pencil.3. To make a choice from a menu, lightlytap the tip of the stylus on that choice.4. To write data into a field on a form,use the stylus to print the letters ornumbers. Use very light pressure.Using the Laser ScannerThe RH767 has an integrated laser scanner which reads all major bar code labels withexcellent performance.NOTE: Reading software must be enabled in order to operate the scanner. This can be auserloaded application or a pre-loaded utility such as Scanner Setting.Activate the laser scanner by pressing eitherone of the trigger keys located on the left andright side of the unit.The RH767 has a built-in Scanner Settingutility that allows you to test the device’sbarcode scan function.1. To launch Scanner Settings, press[FUNC] + [7].NOTE: Alternatively, tap Start → Settings →System →Scanner Settings.EscalphaFunc Enterab cdef g hmrqijno kpDeltxy zBkSpu v wls12 345 678 90@%“<,/.. -+=([[Scan button