- 51 -3.6 Interleaved 2 of 53.6.1 Interleaved 2 of 5To enable or disable Interleaved 2 of 5, scan the appropriate bar code below.3.6.2 Set Lengths for Interleaved 2 of 5The length of a code refers to the number of characters (i.e., human readablecharacters), including check digit(s) the code contains. Lengths for I 2 of 5 maybe set for any length, one or two discrete lengths, or lengths within a specificrange. To set lengths via serial commands, see Setting Code Lengths ViaSerial Commands.NOTE When setting lengths, single digit numbers must always be preceded by aleading zero.One Discrete Length - Select this option to decode only those codescontaining a selected length. For example, select I 2 of 5 One DiscreteLength, then scan 1, 4, to decode only I 2 of 5 symbols containing 14characters. Numeric bar codes begin on Appendix B. To change the selectionor cancel an incorrect entry, scan Cancel on Appendix B.
