Unitech MS840 Quick Reference Manual

Also see for MS840: User manual User manual User manual Quick reference guide Quick reference guide

Unitech MS840 Quick Reference Manual Manual pdf 1 page image

EnglishMS840 Wireless ScannerQuick Reference GuideDeutsch Español Français 中文(简体) 中文(繁體) 日本語 영어Cradle ModeConnectionBefore connecting the MS840 cradle to your host PC, please fully charge thebattery of MS840. Connect the power supply to power source and to the MS840cradle. It takes approximately 5 hours to fully charge the battery.When battery is charged connect the cradle to the host computer.Device Manager will show “USB Human Interface Device”,and if you double click it, it will show “Wireless Base” on itsproperties window.Cradle Mode (Default), Connection of MS840 through cradleCradle-less Mode,Direct connection of MS840, without cradle1.Turn on your Host Device (Host). Scan the Cradle-less Mode barcode.Cradle-less Mode2.The LED of MS840 will flash in blue. Set your Host; wirelessly search forthe MS840 scanner. When your Host locates a “HID SCANNER”, selectit.3.You will get a pairing pin code which needs to entered into MS840. Scanthe “Link Keys” barcode and scan the labels according to the pin code.Link Keys(0) (8)(4) (C)(1) (9)(5) (D)(2) (A)(6) (E)(3) (B)(7) (F)1.Connect power supply to the cradle. Turn on your computer. Connect thecradle to the USB, RS232, or PS2 port of your computer, depending of thecable delivered with your MS840.2.Determine that the power LED on the cradle is bright in solid green and thecommunication status LED on the cradle is bright in solid blue.3.Scan the Cradle Mode barcode.4.Scan the barcode label on the bottom side of the cradle (Host Address).5.Determine that the scanner LED turns off and thescanner beeps shortly one time with a high toneand that the LED on the cradle flashes in blue(communication status indicator).6.Connection can be tested by pressing the Pagerbutton at the cradle. (Continued to step 4 on page 2)