Unicum FOODBOX LIFT TOUCH User Manual

Also see for Foodbox Touch: User manual

Unicum FOODBOX LIFT TOUCH User Manual Manual pdf 15 page image

FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCHPage 15Version 1.3 / December 2018ТМATTENTIoN!To prevent the vending machine from overturning it’s prohibited to open the vendingmachine doors and pulling out the shelves until the vending machine is securely fixedon the mounting surface!5.4 Electrical connectionThe vending machine is supplied ready for connection by using a power cord to a ~230 V / 50 Hzsingle-phase AC power circuit. The vending machine should be connected to the wall outlet with groundingcontact.After the electrical connection, the vending machine plug should be accessible.5.5 Wall mountingThe vending machine design permits its mounting to the wall. The wall mounting helps preventingthe vending machine from overturning in the cases of damaging and breaking.To mount the vending machine to the wall:- take the rests and self-tapping screw packed for the duration of transportation into the productdispensing tray;- fix the rests to the vending machine by using four screws;- move the vending machine close to the wall;- mark the location of mounting holes by a marker;- move the vending machine away from the wall and drill 2 blind holes for the screw plugs installation;- install the screw plugs and move the vending machine to the wall, so that the fixing holes in the wallmatch with the holes in the rests. Then fix the vending machine by using self-tapping screws.figure 7 - Vending machine wall mounting1 - Self-tapping screw2 - Screw plugNote: When fixing the vending machine to the wall, at the first place fix the wall mount rests to thevending machine, and only then proceed fixing the vending machine to the wall!