Menu
Uni-bond E-2109AC Installation Manual
  |
Last Updated: 03/30/2022Light should be fused with 5 Amp Fuse (ATM05 sold separately)Wire ColourFunction Connect ToRedBlackWhiteYellowPowerGroundDimmingPattern Selection & Synchronization+12/24 V DC- Ground+12/24 V DC+12/24 V DC- Once to the next pattern- Quickly 3 times to flash pattern #1Briefly Connect Pattern Selection wire (Yellow wire) to Power wire (Red wire)All lamps must be set to the same pattern before synchronization.Connect Yellow Wires of all units together for synchronization.NOTE: Disassembling lamp or cutting the wires voids the warrantyINSTALLATION MANUALE-2109AC / E-2109ACMWiring InformationSwitch # Lamp FunctionSwitch 1Switch 2Switch 3PowerPattern Selection& SynchronizationDimming Function (optional)(switches sold separately)Operation:E-2109AC E-2109ACMFlash Pattern buttonON/OFF button6.3” (160mm)Pattern SelectionON/OFF SwitchFlash Pattern Button- Once to the next pattern- Quickly 3 times to flash pattern #1Momentarily press the buttonSynchronizationFlash PatternsNO. Flash Patterns123456789101112131415Double FlashSingle Flash (2 Hz)Triple Flash (2 Hz)Quad Flash (2 Hz)Random PatternsSteadySingle Flash [SAE Class 1]Double Flash [SAE Class 1]Triple Flash [SAE Class 1]Quad Flash [SAE Class 1]Quint Flash [SAE Class 1]Mega FlashGiga FlashUltra Flash [SAE Class 1]Single-Quad FlashesNO. Flash Patterns1617181920212223242526272829Hi/Lo Single FlashSingle-Triple-Quad FlashesHalf Steady / Half Double FlashLeft/Right Alternating Single FlashLeft/Right Alternating Double FlashLeft/Right Alternating Triple FlashLeft/Right Alternating Quad FlashLeft/Right Alternating Quint FlashLeft/Right Alternating Mega FlashLeft/Right Alternating Giga FlashLeft/Right Alternating Ultra FlashLeft/Right Alternating Single-Quad FlashesLeft/Right Alternating Hi/Lo Single FlashLeft/Right Alternating Single-Triple-Quint FlashesSuggested Switch ConnectionSwitch #1ST100(ON/OFF)Switch #2ST108(OFF-Momentary ON)Switch #3ST100(ON/OFF)Jumper WiresFrom Battery PositiveGroundPowerPattern Selection& SynchronizationDimming FunctionBattery Ground NOTE: If dimming function is notrequired, this connectioncan be skippedRed YellowWhiteBlack |
Related manuals for Uni-bond E-2109AC
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved