Ulvac OMT-100A Instruction Manual

Ulvac OMT-100A Instruction Manual Manual pdf 1 page image

MODEL NO OMT-100A/OMT-200AOIL MIST TRAPINSTRUCTION MANUALBe sure to read this manual before using this instrumentand keep it in your file for future reference.The contents of this manual are subject to change withoutnotice for improvement.ULVAC KIKO , Inc.1-10-4, Kitashinyokohama,Kohoku-ku, Yokohama, 223-0059, JapanTEL 045-533-0205 FAX 045-533-02040. INTRODUCTION0.1 Before Using This UnitUpon receipt of this unit, check that the delivered unit is the correct model you ordered and thatthere is no damage in transit.For the names of components of the oil mist trap in this manual, refer to "8. EXPLODEDVIEW".! WARNINGBefore installation, inspection and maintenance, carefully read this manual and fullyunderstand the specifications, operating procedure and safety cautions.! NOTENo part of this manual may be reproduced for use by a third party without writtenconsent by ULVAC KIKO.0.2 Denotations in This ManualThe following denotations are used throughout this manual to call operator's attention tosafety.The denotations are classified into the following categories.! DANGERFailure to comply with DANGER involves the possibility of impending loss of life orserious personal injury.! WARNINGFailure to comply with WARNING involves the possibility of loss of life or seriousinjury.! CAUTIONFailure to comply with CAUTION involves the possibility of medium degree of personalinjury or serious damage to the equipment.! NOTEFailure to comply with NOTE involves the possibility of damage to the equipment ormalfunction of the equipment.-01-