Menu
UltraPlus X-9200HD PVR User Manual
                                                                                      | |
Contents
| 
503.2 Positioner Setting Satellite : Select the satellite which you want tosearch for the Service.- Press the LEFT/RIGHT ARROW button to selectthe satellite.- If you press the OK button, a complete satellitelist will be displayed.- Select the wanted satellite name.- If the desired satellite name is not listed thenselect User Defined. Tuner : Select tuner that you want to set (Tuner 1/ Tuner 2). If you have set ‘Loop-Through’ in themenu(Installation-Dish Setting-Tuner Connection), this menu(Tuner) will be automatically disabled. Frequency : Select the satellite frequency you want to use to check for a signal. Positioner : Select the positioner.- None : (No Positioner)- Using DiSEqC 1.2 :Move : To move the dish, press LEFT/RIGHTbutton.Fine Move : To move the dish in smaller steps,press the LEFT/RIGHT ARROW button.Step : Set to positioner moving steps as 1, 2, 3, 4Positioner Command : To use various positionercommands, press the OK button. Then, availablepositioner commands will appear.- Using USALS :Move : To move the dish, press the LEFT/RIGHTbutton.Fine Move : To move the dish in smaller steps,,press the LEFT/RIGHT ARROW button.Step : Set to positioner moving steps as 1, 2, 3, 4Dish Longitude : Enter the longitude position ofthe antenna using the NUMERIC buttons.Dish Latitude : Enter the latitude using theNUMERIC buttons.Go To : Press the OK button to rotate the dish tothe selected antenna position. Dish Setting : Press the OK button to move to Dish Setting menu directly. Service Search : Press the OK button to move to Service Search menu directly. |
Related manuals for UltraPlus X-9200HD PVR
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved