Menu
UltraLasers DHOM Series User Manual
  |
--------------------------------------------------------------------------------------------------------Ultralasers, Inc.Address: 610-3050 Pharmacy, Ave. Toronto, Canada. M1W 2N7E-Mail：shawn@ultralasers.comLaser User’s ManualThank you for using DHOM series products, please read this instruction manualcarefully before using these products, and store it for later references.1. Safety Precautions1-1 Please ensure the shell temperature of the laser head is similar to roomtemperature before turning on the laser, to prevent differences betweentemperatures that may be harmful to the device.1-2 Laser beams are extremely dangerous, to ensure the safety of you and others, donot point the beam at one’s body or flammable objects. Do NOT point the beamdirectly at one’s eyes.1-3 This product should be used in a dry, clean and static-free area. Avoid heat, dampand shock.2. Installation Notices.2-1 Please place the laser head and the power supply on a heat-proof surface. (e.g.metal board.)2-2 This product has an air-cooled system, please ensure that there is 5cm ~ 10cmspace between the laser head and an object, to avoid overheating.2-3 When this product and other parts are placed inside the box, ensure that there isenough ventilation room, ensuring that air can flow freely in and out of the box.2-4 If putting ventilation fan within the package, please ensure that the wind directionand the laser ventilation fan are in the same direction.NOTE: Not following the above instructions could lead to damages to the parts.3. Product Knowledge3-1 Power switch placed in “OFF” is turned off. “ON” is on.3-2 Key position placed in “OFF” is turned off. “ON” is on.3-3 AC input, voltage of this product is 50-60Hz, AC 85-260V |
Related manuals for UltraLasers DHOM Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved