Ublox EVK-LILY-W1 Quick Start Manual

Also see for EVK-LILY-W1: User guide

Ublox EVK-LILY-W1 Quick Start Manual Manual pdf 1 page image

Quick Start EVK-LILY-W1Download the latest EVK-LILY-W1 documentationfrom www.u-blox.com/evk-downloads.1. Build and install the Linux drivers andconfiguration tools as per the User Guide.2. Select SDIO or USB interface through jumpersettings. The I/O voltage is set to 3.3 V bydefault.a. For SDIO (2a): Bridge J2 7=8 and J3 5=6b. For USB (2b): Bridge J2 5=6 and J3 7=83. For EVK-LILY-W131: Connect one antennawith U.FL connector to the antennaconnector J6 (3).4. Connect the EVB (1) to the host either by:a. Inserting the EVB with the SD card connec-tor (4a) into an SDIO capable slot orb. Connecting a USB cable from the host tothe micro-B connector J7 (4b) on the EVB.5. Power LED (5) is green.UBX-15031003 - R011. Overview 2. Setup1 (EVB)4b (Micro-USB)4a (SD cardconnector) 5 (Power LED)2a (SDIO) 2b (USB)3 (U.FL antenna connector J6- For EVK-LILY-W131 only)

/ 2

Related manuals for Ublox EVK-LILY-W1